Shortcut Menu Operation; Sql" (Squelch); Function "Vox" (Voice Operated Transmission); Select Wideband Or Narrow Band "W/N - Baofeng UV-5R User Manual

36
37
38
39
40
RP_STE(Tail toneelimination in communication through
repeater)
RPT_RL(Delay the tail tone of repeater)
PONMGS(Boot display)
ROGER(tone end of transmission)
RESET (Restore to default setting)
OFF/1,2,3...10
OFF/1,2,3...10
FULL/MGS
ON/OFF
VFO/ALL
12.2.-SHORTCUT MENU OPERATION:
l.-Prcssthe keyMENU,then pressthe keyA or• to select the desired menu.
2.-Pressthe key MENU again,cometo the parameter setting.
3.-Press the kcv A or • to select the desired parameter.
4.-Press the key MENU toconfirm andsave, press thekey EXIT tocancel setting or clear theinput.
MENU N0-
PARAMETER
1
MENU NO-
• PARAMETER
MENU
• PARAMETER
en
NO.
MENU ™
PARAMETER
-Note:
Under channel modc.the following menu settings are invalid:CTCSS,DCS,W/N,PTT-
ID,BCL,SCAN ADD TO,S-CODE,CHANNEL NAME.Only the H/L power could bechanged.
12.3.-"SQL" (SQUELCH):
-The squelch mute the speaker of the transceiver in the absence of reception. With the squelch level
correctly set, you will hear sound only while actually receiving signals and significantly reduces battery
current consumption. It is recommended that you set Level 5.
12.4.- FUNCTION "VOX" (VOICE OPERATED TRANSMISSION):
-This function is not necessary topush the |PTT1 on the transceiver for a transmission. Transmission
is activated automatically by detecting the radio voice. When finish speaking, the transmission
automatically terminated and the transceiver will automatically receive signal. Be sure to adjust the
VOX Gain level to anappropriate sensitivity toallow smooth transmission.
12.5.- SELECT WIDEBAND OR NARROW BAND "W/N":
Inareas where the RF signals aresaturated, you must use the narrow band oftransmission to avoid
interference in adjacent channels.
12.6.-TDR (DUALWATCH/DUAL RECEPTION):
This feature allows you tooperate between frequency Aand frequency B. Periodically, thetransceiver
checks whether a signal is received on another frequency that we have scheduled. If you receive a
signal, the unit willremain in the frequencyuntil the received signaldisappears.
13