Command/Key Definition - Baofeng UV-5R User Manual

8 J.- COMMAND/KEY DEFINTTION:
• [PTTl(PUSH-TO-TALK):
Press and hold down the [PTT] button to transmit; release it to receive.
• SK-SIDE KEY1/|CALL):
- Press the [CALL] button.to activate the FM Radio;Press it again to deactivate the FM Radio.
- Press and bold on the [CALL|button,to activate the alarm function; Press and hold it again,to
deactivate the alarm function.
• SK-SIDE KEY2/[MONI):
-Press the [MONIJ button,to turn on the flashIight;Press it again to turn off.Press and hold on the
[MONI] button,to monitor the signal.
•IVFO/MRIBUTTON:
-Press the [VFO/MR] button,™ switch the frequency mode and channel mode,
•IA/B]BUTTON:
-Press the [A/B] button.to switch frequency display.
•[BAND1BUTTON:
-Press the [BAND]button,to switch band dispaly.
-While FM radio being activated.press the [BANDJbutton to switch the band of FM radiofband 65-
75MHz/76-108MHz).
•t*SCAN]KEY:
•Press the (*SCAN) key to activate the Reverse function,it will exchangea separate reception and
transmission frequency.
-Press the [*SCAN] key for 2 seconds to start scanning(frequency/channel).
- While FM radio being activated.press the hvSCAN] key to search FM radio station.
-While setting the RX CTCSS/DCS, press the key [*SCAN] to scan the RX CTCSS/DCS.
•l#n-»] KEY:
-Under channel mode, press [#n-»] key to switch High/Low transmit power.
-Press I#p-»] key for 2 seconds to lock/unlock the keypad.
•FUNCTION KEYPAD:
-|MENU]key:
-To enter the menu of the radio and confirm the setting.
-WWkey:
-Press and hold |A]or(*]key for frequency up or down fast.
-Press [A]or(A]key,the scanning will be opposite.
-[EXITlkey:
•To cancel /clear or exit.
•NUMERIC KEYPAD:
-Used to enter information for programming the radio's lists and the
non-standard CTCSS
-Under transmission mode, press the numeric key to send the signal
code(tbe code should be set by PC software).
09