Subscribe to Our Youtube Channel
Related Manuals for REMKO PWW 4000
Summary of Contents for REMKO PWW 4000
-
Page 1: Spare Parts
REMKO PWW 4000 Warm Water Heating Units Operation Technology Spare Parts REMKO – powerful like a bear. Edition GB – P08... -
Page 3: Table Of Contents
Electrical Connection Initial Operation Shutting Down the Unit Always keep these operating instructions near or on the unit! Subject to alterations! Warm Water Wall-Mounted Heating Units REMKO PWW 4000 Contents Page Customer Service and Guarantee Service and Care Maintenance Technical Data... -
Page 4: Safety Instructions
Safety Instructions Extensive tests have been conducted on the material, functionality and quality of the units. Hazards may nevertheless arise if the unit is used by persons not familiar with its operation or if the unit is not used for its intended purpose. Please make sure to always comply with these safety instructions: ◊... -
Page 5: Unit Assembly
Unit Assembly Brackets Brackets for wall and ceiling assembly (2 per unit) are inserted into the openings at the back of the unit and at- tached with the supplied screws. Components that are attached directly to the units, such as mixed-air boxes or filter boxes, are equipped with a bracket adapter. -
Page 6: Sample Assemblies
Sample Assemblies Circulation / Fresh air mode via the outside wall Customer- installed FK MLK = Outside air intake grille = Filter box for mixed-air box MLK = Mixed-air box Wall assembly In circulation mode with FK filter and KO bracket Ceiling assembly In circulation mode with FK filter and KO bracket Electric Connection... -
Page 7: Initial Operation
Initial Operation Prior to initial operation Prior to initial operation, the following must be com- pleted: 1. Check that assembly is mechanically sound. 2. Check that the connection to the customer-installed heating system is correct. 3. Check that the frost protection mechanism is work- ing properly If assembled. -
Page 8: Service And Care
Service and Care REMKO PWW units require virtually no maintenance when operated normally. They should, however, be checked regularly and, if necessary, cleaned, to ensure proper operation. Important precautions prior to maintenance work Perform the following steps prior to all service work: 1. -
Page 9: Technical Data
Technical Data PWW 4000 series Type Electrical connection Frequency Power consumption Rated current Speed Air capacity Sound pressure level Heating medium connection Heating medium Operating pressure Weight 1) Measurement at intervals of 5 m, measuring room volume 800 m³, average reverberation time 1.4 s... -
Page 10: Accessories
Accessories The units are outfitted at the factory with horizontal air outlet flaps. The individually adjustable fins allow the flow of warm air to be aimed in two directions. Air outlet accessories Air outlet flap B (horizontal/vertical) Installing the flap allows air to be directed across longer distances. -
Page 11: Switching Units
Adjustment motor open/closed The adjustment motor is mounted directly on the flat axis. It is equipped with a universal terminal block and is fastened into place with a locking piston supplied with the unit. The drive has a mechanism protecting it from overload- ing and requires no final switch. - Page 12 MSRD 2.5 switching unit Rotary current 400 volt, fan 2-speed maximum electrical capacity 2.5 kW Wall-mounted, motor protected by integrated thermal con- tacts in the fan motor. Design Plastic housing, protection type IP 41. Protective insulation in accordance with VDE, plate with symbols for switching positions, incoming power and protective conductor terminals, main contactor, control switch with the functions “Off/Speed 1/Speed 2”, control...
- Page 13 SW 2.1 D switching unit Rotary current 400 volt, fan 2-speed maximum electrical capacity 4 kW Wall-mounted, full motor protection through integrated connections for thermal contact, connection terminals for thermal contacts, room thermostats and frost protec- tion thermostat. Design Plastic housing, protection type IP 65. Protective insulation in accordance with VDE, front plate with symbols for switching positions and operating modes, power input and protective conductor terminals,...
- Page 14 SW 2.2 DSK switching unit Rotary current 400 volt, fan 2-speed maximum electrical capacity 4 kW Wall-mounted, full motor protection through integrated connections for thermal contacts, connection terminals for thermal contacts, room thermostats, frost protection thermostat and mixed-air box adjustment motor. Design Plastic housing, protection type IP 65.
- Page 16 REMKO GmbH & Co. KG Klima- und Wärmetechnik 32791 Lage, Im Seelenkamp 12 32777 Lage, PO Box 1827 Phone +49 5232 606-0 +49 5232 606-260 E-mail info@remko.de Internet www.remko.de...
Need help?
Do you have a question about the PWW 4000 and is the answer not in the manual?
Questions and answers