Buffalo LS-WXL User Manual page 43

Using your LinkStation
Notes: To use the LinkStation with Jumbo Frame, your router/switch/hub must support Jumbo
Frame.
To use Jumbo Frame (4102/7422/9694 bytes), your computer's NICs and all switches, hubs,
and routers on the transmission route need to support Jumbo Frame. If any device on the
route does not support Jumbo Frame, use standard transmission (1518 bytes) instead.
If you are using Jumbo Frame and back up data from a LinkStation/TeraStation to another
LinkStation/TeraStation, set the Ethernet frame sizes of the LinkStations/TeraStations to
the same settings (or the closest available). If the Ethernet frame sizes are significantly
different, the backup job may fail. If you have problems with backup jobs, select the default
frame size (1518 bytes).
LinkStation User Manual
Co nnec t io n
LinkStation
J um b o Fr a m e Jum b o Frame
( 4102 / 742 2 / 969 4 ) supported
LinkStation
J um b o Fr a m e Jum b o Frame
( 4102 / 742 2 / 969 4 ) Supported
LinkStation
J um b o Fr a m e Jum b o Frame
( 4102 / 742 2 / 969 4 ) not supported
LinkStation
J um b o Fr a m e Jum b o Frame
( 4102 / 742 2 / 969 4 ) not supported
Transmission
Jumb o Frame
supported
Jumb o Frame
not supported
Jum bo Frame
not supported
Jum bo Frame
supported
T rans m it
Jum bo F ram e
( 4 102 / 7422 / 9 69 4 )
Transmit
normally(1518)
Transmit
normally(1518)
No transmission
42