Settings Menu; Input Filter; Alc; Alc Threshold - Nagra ARES-BB User Manual

14.5 SETTINGS MENU.

The settings menu gives access to several sub-menus.
Settings

Input filter

ALC

ALC threshold

On
Settings
ALC speed
Beep
Compression
On
Settings
Compression
Backlight
Output level
Automatic
14.5.1 INPUT FILTER.
Input filter
Flat
Low cut
Flat
14.5.2 ALC.
ALC
On
Off
On
ALC threshold
-74 dB
Using +/- keys
Using +/- keys
Issue: January 2004
Settings
ALC
ALC threshold
ALC speed
Using +/- keys
The current setting of each is always shown at the bottom of the display.
In "NFS" mode, "COMPRESSION" is shown, in the "FAT 16" mode, the
name compression is replaced by "FILE FORMAT".
Two possibilities are available: "FLAT" or "LOW CUT".
From this sub-menu, the "ALC" can be switched "ON" or "OFF".
It is highly recommended to switch on the "LOW CUT" filter if "ALC" is
turned ON.
14.5.3 ALC THRESHOLD.
The "THRESHOLD" can be adjusted from –104 dB to –74 dB.
In this case the "+"key (8) and the "-"key (7) are disabled. If "USING +/-
KEYS" is selected, the "+"key (8) and "-"key (7) are enabled during
"STOP" and "RECORD" mode, which allows the "THRESHOLD" level to
be adjusted without returning in the "SETTINGS" menu.
Settings
Beep
Compression
Backlight
MPEG 128/48
Settings
ALC threshold
ALC speed
Beep
Normal
Page 17