Table of Contents
Advertisement
14.3.6 CONTRAST.
Contrast
TEST 34
Current contrast = 32
Default contrast = 33
14.3.7 VERSION.
ARES-BB
S/N : 123456789
Soft (FAT): Vx.xx
Audio board: 2
Software options:
#1 #2
14.4 TEMPLATES, "FAT 16" MODE ONLY.
Templates
Recall 4
Store 1
Store 2
"TEMPLATES", select "STORE 1" and press the execute key (13). The message "DONE" will appear.
If now any changes were made in the setup, you can go to "RECALL 1" and press the execute key
once again. This returns the machine to the settings stored in template 1.
Issue: January 2004
This menu permits to adjust the contrast of the display. Pressing the
"UP" (9) or "DOWN" (11) key changes the current contrast. Pressing the
"CENTER" key (13) stores the contrast settings as a default value at
power on.
To escape from the sub-menu, press the "LEFT" key (10) once.
Selecting the "VERSION" sub-menu shows the serial number of the
recorder as well as current version of the software installed. The version
shown in this picture corresponds to the version for the "FAT 16" mode.
Turning on the machine in the "NFS" mode will show the "NFS" version.
To escape from the sub-menu, press the "LEFT" key (10) once.
The Ares -BB can store and recall 4 different templates.
To have an overview of the different sub-menu settings that can be
stored, refer to the menu tree at the end of this
manual. Only menu settings with a red square
against it can be stored.
To use a template, setup the machine as required, then go to
X X X
Page 16
Advertisement
Table of Contents
