Table of Contents
Advertisement
NOTE: Erasing individual takes in the middle of the "DIRECTORY" is not possible. The erase
feature will always erase from the selected take to the end of the card.
14.1.6 DELETE, "FAT 16" MODE ONLY.
Any take from the directory can be deleted without influencing other takes.
14.1.7 DELETE TO END, "FAT 16" MODE ONLY.
Erase the selected take and all takes after until the end of the card.
14.1.8 RENUMBER, "FAT 16" MODE ONLY.
Permits after deleting file(s) to renumber the files from the selected file until the end of the card.
14.1.9 RENUMBER ALL, "FAT 16" MODE ONLY.
Permits after deleting file(s) to renumber all the files from file 1 until the end of the card.
14.2 LOUDSPEAKER.
This switches "ON" or "OFF" the internal loudspeaker.
NOTE: The internal l o udspeaker can only be used in the playback
mode.
14.3 TOOLS.
Tools
Date & Time
Card formatting
Format repairing
several sub-menus are available.
14.3.1 DATE AND TIME.
Selecting "DATE & TIME" gives access to change the time and date of the real time clock. Once the
"CENTER" button (13) is pressed, the first digit starts blinking. The number can be modified by
pushing the "UP" or "DOWN" (9 or 11) keys. Pressing the "RIGHT" arrow key (12) jumps to the next
digit. Once the last number is introduced, the clock starts running. (Hours, Hours, Minutes, Minutes,
Seconds, Seconds)
Introducing the date uses the same procedure.
Once the last number is introduced, the date is memorized.
To escape from the sub-menu, press the "LEFT" (10) or "RIGHT" (12) key once.
Issue: January 2004
Tools
Format repairing
Program select
Version
Loudspeaker
Off
On
On
"Program select" and "Format
repairing" does not appear if the
machine is not equipped with
software option I.
Page 14
Advertisement
Table of Contents
