Copying Your Tapes (Dubbing) - Panasonic Omnivision PV-V4622 Operating Instructions Manual

Copying Your Tapes (Dubbing)

Connection
(Rear Connection shown.)
IN FROM ANT.
VCR
AUDIO OUT
R
R
L
VIDEO OUT
Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on Recording VCR. To
1
monitor the dubbing, also connect a TV as shown.
Connect "L" and "R" AUDIO OUT terminals on Playing VCR to "L" and "R" AUDIO IN
2
terminals on Recording VCR.
In place of a Playing VCR, you can use other equipment, such as a Camcorder.
Simply connect the unit's Audio/Video outputs to the Recording VCR.
Playing (Source) VCR
1
Insert pre-recorded tape.
2
Press PLAY, then PAUSE/SLOW
3
immediately to enter PLAY/PAUSE mode.
The operation of steps 4 and 5 must be done on the
playing and recording VCRs at the same time.
4
Press PLAY to start dubbing.
Playing VCR starts playback.
5
Press STOP to stop dubbing.
To Monitor Dubbing on Your TV
1
Turn your TV on and tune to the Recording
VCR channel (CH3 or CH4).
2
Set the VCR/ TV Selector on the Recording
VCR to "VCR."
Dubbing tapes protected with Copy
Note
Guard will result in poor quality
recordings.
Caution:
Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
36
VCR
OUT TO TV
R
AUDIO IN
L
R
L
VIDEO IN
VHF/UHF
Insert blank tape with record tab.
Press INPUT to set VCR Input mode to LINE1
for Video Input (Rear) or to LINE2 for Video Input
(Front). (See "Selecting the Input Mode" below.)
Press REC, then PAUSE/SLOW
immediately to enter REC/PAUSE mode.
Press PAUSE/SLOW to start dubbing.
Recording VCR starts recording.
Press STOP to stop dubbing.
Front of VCR
TV
VIDEO IN 2
(Audio/Video In Terminals on
the front of VCR are available)
Recording (Editing) VCR
Selecting the Input Mode
Method 1: Press INPUT repeatedly.
Channel Number ↔
Method 2: Press CH
Display will change as below.
1 2 3
LINE2 LINE1
• "L1" or "L2" lights on Multi-Function Display
(about 4 sec.) when LINE1 or LINE2 is selected.
• LINE1: For rear audio/video connection.
LINE2: For front audio/video connection.
L-AUDIO IN2-R
↔ ↔ ↔ LINE1 ↔ ↔ ↔ LINE2 ↔ ↔ ↔
/ .
(CABLE) (TV)
125 or 69