Replacement Of Regulator Ic (Ic2701) - Panasonic SA-AKX10PH Service Manual

Step 9 Detach 22P FFC at the connector (CN2706) on Main
P.C.B..
Step 10 Remove Main P.C.B..
Caution: During assembling, ensure that earth plate is
bended flat against the Main P.C.B. properly when inserted
to locators.
9.12. Replacement of Regulator IC
(IC2701)
• Refer to "Disassembly of Main P.C.B.".
9.12.1. Disassembly
(IC2701)
Step 1 Desolder pins of the Regulator IC (IC2701) on the sol-
der side of Main P.C.B..
Step 2 Remove 1 screw.
Step 3 Remove the Regulator IC (IC2701) from the Main
P.C.B..
Caution: Avoid touching the Small Heatsink due to its high
temperature after prolong use. Touching it may lead to
injuries.
40
of Regulator IC