Panasonic SA-AKX10PH Service Manual page 18

6.2.2. Doctor Mode Table 2
Item
Mode Name
Cold Start To active cold start upon next AC
power up when reset start is execute
the next time.
Volume Setting
To check the volume setting of a main
Check
unit.
To check the FL segment display
FL Display
Check All segment will light up while all LED
blink at 0.5s,intervals.(if any)
DLS6 Reliability To determine CD Mechanism Unit
Test (Loading) (DLS6C) Open/Close operation.
In this mode, the tray will open &
close.
Note: Refer to Section 6.3 Fig 1 for
process flow.
DLS6 Reliability To determine CD Mechanism DLS6C
Test (Traverse) Access Inner & Outer disc operation.
In this mode,ensure the CD is in the
main unit.
Note: Refer to Section 6.3 Fig 2. for
process flow.
DLS6 Reliability
To determine CD Mechanism Unit
Test
(DLS6C) Open/Close & Access Inner &
(Combination)
Outer Disc Operation.
In this mode,ensure the CD is in the
main unit.
Note: Refer to Fig. 6.3. for process
flow.
Description
FL Display
Press [7]: VOLUME50
Press [8]: VOLUME35
Press [9]: VOLUME27
Press [>10]: VOLUME0
The counter will
increment by one.
When reach 9999
will change to 0000
Cancellation Display
The counter will
increment by one.
When reach 9999
will change to 0000
Cancellation Display
The counter will
increment by one.
When reach 9999
will change to 0000
Cancellation Display
18
Key Operation
Front Key
In Doctor Mode:
1. Press [4] button on
remote control.
In Doctor Mode:
1. Press [7],[8],[9],[>10]
button on remote control.
Volume
In Doctor mode:
1. Press [2] button on
remote control.
In Doctor Mode:
1.Press [5] button on remote
control.
2.To cancel, press [0]
on remote control.
In Doctor Mode:
1.Press [6] button on remote
control.
2.To cancel, press [0]
on remote control.
In Doctor Mode:
1.Press [DIMMER] button on
remote control.
2.To cancel, press [0]
on remote control.