To Check And Cancel A Timer Programme - Panasonic NV-VP31 Operating Instructions Manual

Panasonic dvd player/ video cassette recorder operating instructions nv-vp31
Table of Contents

Advertisement

Tape Speed Auto Change Function
During a timer recording performed in SP mode, this function
automatically changes the tape speed if the unit determines that the
remaining tape time is insufficient to record the entire programme.
If the remaining tape time is still not sufficient even in LP (EP) mode,
the programme cannot be recorded to the end.
The tape speed will change as follows:
SP # LP
PAL system:
SP # EP
NTSC system:
≥This function cannot change the recording speed to the EP mode
for PAL system.
To release the unit from timer recording standby
For example, if you want to record something else before the programme start time:
..............................................................................................................................................................................................................................................................................................................................
Press [TIMER
] to make "
≥Be sure to press [TIMER
] before the programme start time to put the unit on recording standby.
The programme only works if "

To check and cancel a Timer Programme

≥This unit must be turned on, or in timer recording standby mode.
..............................................................................................................................................................................................................................................................................................................................
[1] Press [PROG/CHECK] twice.
The Timer Programme List screen appears.
..............................................................................................................................................................................................................................................................................................................................
[2] Press [PROG/CHECK] repeatedly to select the programme.
≥Every time you press [PROG/CHECK], the programme shifts below.
≥When "JET NAVIGATOR" is set to "ON", press [1] to display the category.
Press [1] again to make the previous display appear.
..............................................................................................................................................................................................................................................................................................................................
[3] Press [CANCEL/RESET] to cancel.
..............................................................................................................................................................................................................................................................................................................................
[4] Press [MENU] to exit the on-screen display.
Notes:
≥If timer recording is not completed (due to insufficient tape or cancellation by the user), the programmed timer recording data will be
cancelled from the memory by 4 A.M. two days later.
However, if the timer recording function is activated at that time, the programmed timer recording data will not be cancelled.
≥After you cancel the programmed timer recording data, the current tape speed during the stop mode is displayed.
" goes out.
" is on.
e.g. NTSC system (when using a 60-min. tape)
Timer programming
1st programme
(30 min.)
Video tape
15 min.
30 min. at SP
at SP
≥The tape length must be set correctly (lpage 24).
≥Some tapes may not work correctly.
≥If the recording speed changes during a timer recording, some
picture distortion will occur at that point.
19
Timer Recording
2nd programme (60 min.)
45 min.
at EP
DATE
CH
ON
OFF
1
29SA
2
20:02
21:30
2
SU-SA
25
10:30
11:00
3
SU
14
15:00
16:00
4
19WE
5
22:15
23:30
5
28FR
A1
20:02
21:30
6
30SU
4
19:10
19:55
7
– – – –
– –
– –:– –
– –:– –
8
– – – –
– –
– –:– –
– –:– –
END:MENU
SELECT:
DATE
CH
ON
OFF
1
29SA
2
20:02
21:30
2
SU-SA
25
10:30
11:00
– – – –
– –
– –:– –
– –:– –
3
4
19WE
5
22:15
23:30
5
28FR
A1
20 02
21 30
SP
A
SP
EP
SP
EP
SP
A
SP
EP
SP

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nv-vp31 seriesNv-vp31glNv-vp31gn

Table of Contents