Pre-Operation Inspection - RIDGID KJ-2200 User Manual

Figure 5 – KJ-3100 Handle Assembly

Pre-Operation Inspection

WARNING
Before each use, inspect your water jetter and cor-
rect any problems to reduce the risk of serious in-
jury from high pressure water and other causes and
prevent jetter damage.
Always wear safety glasses, gloves and other appro-
priate protective equipment when inspecting your
jetter to protect against chemicals and bacteria on
the equipment.
1. Make sure that the engine switch/key is in the OFF
position.
2. Clean any oil, grease or dirt from the equipment, in-
cluding the handles and controls. This aids inspec-
tion and helps prevent the machine or control from
slipping from your grip.
3. Inspect the water jetter and accessories for the fol-
lowing:
• Proper assembly and completeness.
• Broken, worn, missing, mis-aligned, binding or loose
parts.
• Presence and readability of the warning labels.
(See Figure 6.)
• Any other condition which may prevent the safe
and normal operation.
KJ-2200/KJ-3100 Water Jetting Machines
If any problems are found, do not use the water jetter
until the problems are corrected.
T-Knobs
Insert Hair
Pin
Figure 6A – KJ-2200 Warning Labels
Figure 6B – KJ-2200 Warning Labels
Figure 6C – KJ-3100 Warning Labels
7