How To Treat; Treat With The Massage Button - Omron HV-F127 Instruction Manual

TENS-EN01-22[HV-F127]-2

How to Treat

This section explains the treatment procedure and the entire operation flow from turning on the power
to storing of the unit.
Three treatment methods are available. Select your favourite one to receive treatment.
– Treat with the Relieve Button
When you want to relieve severe acute pain promptly.
– Treat with the Region Button
When you want to treat the selected region of shoulder, sole, calf, and lower back (waist) with the
effective program.

– Treat with the Massage Button

When you want to treat the region according to your symptom and favourite operation by selecting the
massage method from Tapping, Kneading, Pushing, and Rubbing.
Have you connected the Electrode Cord? (Refer to Page 7.)
Have you attached the Pads to the regions you want to receive treatment? (Refer to Page 8.)
1. Turn on the power.
Rotate the Intensity Dial/Power Button downwards.
When you hear a click, the power is turned on and the treatment
starts.
When you use the unit for the first time, the Shoulder light will flash
and WIDE will be displayed. When you use the unit for the second
time and after, the Buttons you used in the previous treatment
will flash.
If the Pads come off:
If the Pads come off from the skin, the power will be turned off
automatically in approximately 7 seconds. Turn the Power to OFF,
then re-attach the Pads correctly and turn on the power again.
2. Select one treatment method.
– Treat with the Relieve Button
– Treat with the Region Button
– Treat with the Massage Button
11
11/17/03 6:49 PM Page 12
(Refer to Page 13.)
(Refer to Page 14.)
(Refer to Page 15.)
INTENSITY
/POWER
RELIEVE
OFF
SOLE
LEG
SHLDR WAIST
REGION
TAP KNEAD PUSH RUB
MASSAGE
SOFT
REPEAT
POINT
SPECIAL
R W
MODE
WIDE
ELECTRONIC
NERVE STIMULATOR