Operation - Kärcher hds 895 Operating Instructions Manual

High pressure cleaner
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 15
5.1 Venting the appliance
·
Open the water intake.
·
Allow the appliance to run without the high-
pressure hose until the water emerges without
bubbles.
·
Then connect the high-pressure hose.
·
If the spray lance and high-pressure nozzle
have already been fitted to the high-pressure
hose, you can vent the appliance as follows:
With the hand-held spray gun open, switch
the appliance on and off several times at
intervals of 10 seconds until the water emerges
from the high-pressure hose without bubbles.
5.2 High-pressure nozzle
·
The effectiveness of the high-pressure jet
depends to a great extent on the spray angle.
A 25° fan jet nozzle is usually employed
(included in standard delivery).
·
Other nozzles are available as accessories.
0° full jet nozzle
for stubborn dirt.
40° fan jet nozzle
for sensitive surfaces.
Dirt blaster
for thick layers of dirt.
Variable angle nozzle
with adjustable spray angle
·
At first always direct the high-pressure jet
from a greater distance at the object which is
to be cleaned, thereby preventing damage
from excessive pressure.

5. Operation

5.3 Adjusting the operating pressure
and flow rate
·
You can adjust the operating pressure and
flow rate:
1. With the pressure and volume control on
the pump head
– Screwing in the adjusting screw increases
the flow rate and operating pressure
– Screwing out the adjusting screw
decreases the flow rate and operating
pressure.
only with 1.027-903 GB
2. With the servo pressure valve on the hand
spray gun
– Turning the control sleeve to the right
increases the operating pressure and water
volume
– Turning the control sleeve to the left
decreases the operating pressure and
water volume.
5.4 Operating with cold water
·
Set the thermostat to 30°C.
·
Switch the appliance switch to "
5.5 Operating with hot water
·
Set the thermostat to the desired temperature.
·
We recommend the following cleaning
temperatures:
30 - 50°C for light dirt
max. 60°C for dirt which contains protein,
60 - 90°C for cleaning vehicles, machines
·
Switch the appliance switch to "
e.g. in the food industry
HDS 895
GB
".
".
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents