Tv Operation; Picture Menu; Sound Menu - Sansui LEDTVSKQ48FH Owner's Manual

1.PICTURE MENU

Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Color Temp.
Blue Screen
Aspect Ratio
Noise
Reduction
Auto Adjust
Horizontal
Pos.Vertical Pos.
Size、Phase
Note : 1) The screen menu will be enabled for PC source only.

2.SOUND MENU

Sound Mode
EQ
Bass
Treble
Balance
Volume
Auto Volume
This function is used to select the preset picture settings. (Standard/Mild/User/Dynamic)
These settings are used to adjust the Contrast (0-100), Brightness (0-100),
Color (0-100), Sharpness (0-100), and Tint (0-100) values for fine adjustments of the picture.
NOTE: Tint is enabled for NTSC channels only.
Use this option to select and change color temperature.
This function is used to ON/OFF the blue back in no Signal condition.
Select the picture size:Auto、4:3、16:9、Zoom、Panorama. Under different channels,
optional scaling mode is different。
The DNR (Off/Low/Middle/High) reduce the noise by applying temporal and spatial noise
reduction filters to Video data.
Auto setting allows the PC screen of TV to self adjust. This automatically sets the Horizontal
position、Vertica- position, Phase and Size.
If picture is not Ok with auto setting then adjust Horizontal position(0-100) / Vertical
position (0-100) manually to adjust the desired picture settings.
Adjust the phase (0-100) and size(0-100) to remove or reduce picture noise.
This function is used to select the preset sound modes(User, Standard, Music, Movie,Sports).
The Equilizer 120Hz, 500Hz, 1.5KHz, 5KHz, 10KHz, (0-100) can be changed by other user.
The bass function is used to vary the bass level from 0 - 100.
The treble function is used to vary the treble level from 0 - 100.
User can select the left/right speaker intensity by changing balance (-50 - +50).
The main speaker volume can be adjusted by varying this volume bar (0-100).
This function is used to for automatic adjustment of volume level(On/Off).
-11-

TV OPERATION