Error Messages - Panasonic AJ-SD755 Operating Instructions Manual

Error messages

When a warning occurs in this unit, the error number
is indicated on the counter display.
Open the DIAG menu to display a description of the
error on the counter display or monitor TV.
When a operational malfunction has occurred in the
unit, the error number flashes on the counter display.
DIAG menu
This display the VTR information.
VTR information includes "WARNING" information,
"HOURS METER" (usage time) information and
"UMID (Unique Material Identifier)" information. A
DIAG menu appears on the monitor when the monitor
is connected to the VIDEO OUT 3 connector on the
connector section.
<Note>
By installing the SDI board (AJ-YA755G, available as
an optional accessory) in the VTR, it is also possible
to display the DIAG menu on a TV monitor which has
been connected to the SDI OUT 3 connector.
$ Displaying the DIAG menu
1
Press the DIAG button.
The DIAG menu screen is displayed on the
monitor, and the message is displayed on the
counter display.
2
Each time the search button is pressed, the display
changes as follows: "WARNING" 5 "HOURS
METER" 5 "UMID INFO" 5 and so on.
3
Press the DIAG button again to return to the
original display.
ON POWER
DVCPRO
DV
OFF
METER COUNTER
FULL/FINE
RESET
L
MONITOR SELECT
R
PREVIEW/PREVIEW AUTO EDIT PREROLL
MONITOR MIX INPUT SELECT
HEADPHONES
VIDEO AUDIO
CH1 CH2 CH1 CH2 TC
PRESET MENU
UNITY
VAR
REC PB
2
JOG SHTL SLOW
ASSEM VIDEO CUE TC STAND BY PLAYER RECORDER
INSERT CH1 CH2
EDIT PLAY REC
A IN A OUT
TRIM
REW STOP FF
SET
IN OUT
SUPER REC INH INT TCG MODE CONTROL
SET DIAG REGEN
ON ON TAPE REMOTE
PRESET
OFF OFF EXIT EE LOCAL
1/3
$ "WARNING" information display
O A warning message is displayed whenever a
warning occurs.
When warnings have not been detected, "NO
WARNING" is displayed.
O When multiple warning occur, the descriptions for
each warning can be checked by turning the search
dial.
63