Panasonic AJ-SD755 Operating Instructions Manual page 46

Setup menus
USER menu
<VIDEO>
No./Item
622 For setting 7.5% setup processing to be
performed on input and output signals.
SETUP When the STOP button is pressed, operation is
transferred to the sub-screen, and the setup level
is set for each output. To return from the sub-
screen, press the STOP button again.
Sub-screen
00 This selects the 7.5% setup processing for
CMPST IN the input composite signal.
0000 THRU :
The signal is recorded in its original form.
0001 CUT :
The signal is recorded with the 7.5% setup
removed.
01 This selects the 7.5% setup processing for
CMPST OUT the output composite signal.
0000 THRU :
The signal is output in its original form.
0001 ADD :
The signal is output with the 7.5% setup
added.
<Note>
Bear in mind the setting for sub-screen item No.
03 (CMPNT OUT) of setup menu item No. 622
(SETUP 25).
02 This selects the 7.5% setup processing for
CMPNT IN the input component signal.
0000 THRU :
The signal is recorded in its original form.
0001 CUT :
The signal is recorded with the 7.5% setup
removed.
03 This selects the 7.5% setup processing for
CMPNT OUT the output composite, component and serial
(digital) signal.
0000 THRU :
The signal is output in its original form.
0001 CUT :
The signal is output with the 7.5% setup
removed.
0002 ADD :
The signal is output with the 7.5% setup
added.
The underlined items indicates the initial setting.
46
Description No./Item
624 For selecting whether to record the closed
caption signals multiplexed on the input
CC REC signals on the tape.
0000 OFF :
No closed caption signal is recorded.
In addition, the EE output signals are blanked.
0001 ON :
When a closed caption signal is detected from
the selected input signal, it can be recorded.
<Note>
If SDTI/1394 signals have been selected as the
input signals, the closed caption signals which
have been multiplexed onto the input signals will
be recorded on the tape regardless of the setting.
645 This selects whether or not to record the
wide-screen information on the tape.
WIDE SELECT
0001 WIDE :
The wide-screen information is not recorded on
the tape.
0002 NORMAL :
The wide-screen information is recorded on the
tape.
<Note>
If SDTI/1394 has been selected as the input
signals using the INPUT SELECT button, the
wide-screen information on the input signals will
be recorded regardless of this menu's setting.
660 This selects whether or not to record the
UMID information on the tape.
UMID REC
0000 OFF :
UMID information is not recorded on the tape.
In addition, EE output signals are blanked.
0001 ON :
UMID information is recorded on the tape.
<Notes>
OIf SDTI/1394 has been selected as the input
signals using the INPUT SELECT button, the
UMID information on the input signals will be
recorded regardless of this menu's setting.
OIf THRU has been selected as the setup menu
item No. 106 (EE MODE SEL) setting, UMID
information of the EE output signals will be
blanked.
Description