Panasonic AJ-SD755 Operating Instructions Manual page 30

Setup menus
Loading user files
The contents of the USER2, USER3, USER4 or
USER5 file can be copied (loaded) into the USER1
file. Also, the contents of the USER1 file can be
copied (saved) into the USER2, USER3, USER4 or
USER5 file.
Load/save
USER 1
Load/save
Load/save
Load/save
1
Press the MENU button.
2
Press the REW button or FF button while holding
down the DIAG button to select the USER1 file.
3
Turn the search dial to move the cursor (2) on the
menu screen to No. A00 (LOAD).
S E T U P - M E N U
< U S E R 1 >
8 0 4 B L A N K L I N E
2A 0 0 L O A D
A 0 1 S A V E
A 0 2 P . O N L O A D
E N D
4
Turn the search dial while holding down the search
button to select the user file whose contents are to
be loaded into USER1.
30
Lock mode can be
USER 2
set
Lock mode can be
USER 3
set
Lock mode can be
USER 4
set
Lock mode can be
USER 5
set
M E N U
N O . A 0 0 - 0 0 0 0
B L A N K
U S E R 2
U S E R 2
O F F
5
Press the SET button.
The following message appears on the menu
screen and counter display.
Menu screen
S E T U P - M E N U
U S E R 2 n U S E R 1 O K ?
Y E S < P L A Y > / N O < S T O P >
Counter display
The number of the user file selected in step
displayed at .
6
Press the PLAY button.
The settings of the user file selected in step
loaded, and the USER1 menu display appears. If
the STOP button is pressed instead, the settings
are not changed, and the USER1 menu display
appears.
7
Turn the search dial to move the cursor (2) on the
menu screen to a number other than No. A00
(LOAD) or No. A01 (SAVE).
8
Press the SET button. The USER1 settings are
stored in the memory.
If the USER1 settings are not to be stored in the
memory, do not press the SET button but press the
MENU button instead.
L O A D
4
is
4
are