Panasonic AJ-D950 Operating Instructions Manual page 79

5. Command table
(1) Commands relating to operation control
<Notes>
As
for the return (completion) message, [ACK] is first returned when data is received, and the execution message is
subsequently returned. It is only the execution message which is listed in this table.
In the case of commands not listed in the table, ER001 (invalid command) is returned after [ACK] has been returned.
VTR
Send command
operation
STOP [STX] OSP [ETX]
EJECT [STX] OEJ [ETX]
[STX] OPL [ETX]
PLAY
REWIND [STX] ORW [ETX]
FAST [STX] OFF [ETX]
FORWARD
[STX] ORC [ETX]
REC
SHTL
[STX] OSF:data [ETX]
FORWARD
data = n: speed data
Return (completion)
message
[STX] OSP [ETX]
[STX] OEJ [ETX]
[STX] OPL [ETX]
[STX] ORW [ETX]
[STX] OFF [ETX]
[STX] ORC [ETX]
[STX] OSF [ETX]
0: STILL
1: ×0.03
2: ×0.1
3: ×0.2
4: ×0.5
5: ×1
6: ×1.85
7: ×4.1
8: ×9.5
9: ×16 : This speed differs according to the setting selected for
setup menu No. 101 (SHTL MAX).
A: ×32 : This speed differs according to the setting selected for
setup menu No. 101 (SHTL MAX).
Supplementary notes
This command is for stopping the tape travel.
The resulting output picture and sound statuses
differ according to the settings selected for the setup
menu No. 105 (AUTO EE SEL).
This command is for ejecting the cassette tape.
The resulting output picture and sound statuses
differ according to the settings selected for the setup
menu No. 105 (AUTO EE SEL).
This command is for starting playback.
This command is for rewinding the tape.
The resulting output picture and sound statuses
differ according to the settings selected for the setup
menu No. 105 (AUTO EE SEL).
The maximum tape speed differs according to the
setting selected for setup menu No. 102 (FF. REW
MAX).
This command is for fast forwarding the tape.
The resulting output picture and sound statuses
differ according to the settings selected for the setup
menu No. 105 (AUTO EE SEL).
The maximum tape speed differs according to the
setting selected for setup menu No. 102 (FF. REW
MAX).
This command is for starting the recording.
This is the forward direction shuttle command.
- 79 -