Panasonic AJ-D950 Operating Instructions Manual page 55

USER menu
<TIME CODE>
N o .
5 0 2 VITC
5 0 3 TCG
5 0 4
505
5 0 6 BINARY
5 0 7 PHASE
5 0 8
5 0 9
5 1 0
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed
Superimposed
No.
display display
525 mode
POS-2 0000
0008
0010
625 mode
0000
0006
0014
0000 TC&UB
REGEN 0001
0002
REGEN 0000 AS&IN
MODE 0001 ASSEM
0002
0003
EXT TC 0000
SEL 0001
0000
GP
0001
0002
0003
0004
0005
0006
0007
0000
0001
CORR
0000
TCG CF
FLAG
0001
0000
DF MODE
0001
0000
V OUT
TC OUT
0001
REF
- 5 5 -
This sets the position where the VITC signal is to be inserted.
10L
(The same line as for VITC POS-1 in 501 cannot be selected.)
18L
2OL
7L
13L
21L
This selects the signal to be regenerated when the time code
generator (TCG) in the REGEN mode.
TC
0: Roth the time code and user bit are regenerated.
UB
1: Only the time code is regenerated.
2: Only the user bit is regenerated.
This selects whether the time code is to be regenerated during
automatic editing using the unit' s control panel.
0: Time code is regenerated with assemble or insert editing.
INSRT
1: Time code is regenerated with assemble editing.
SW
2: Time code is regenerated with insert editing.
3: Setting complies with REGEN/PRESET switch setting.
This selects the time code to be used when an external time
LTC
code is to be used.
VITC
0: The LTC of the TIME CODE IN connector is used.
1: The video signal VITC is used.
000
This sets the usage status of the user bit of the time code
001 generated by the TCG.
0: NOT SPECIFIED (character set not specified)
010
1: ISO CHARACTER (8 bits character set based on ISO646,
011
1502022)
100
2: UNASSIGNED 1 (undefined)
101
3: UNASSIGNED 2 (undefined)
110
4: UNASSIGNED 3 (undefined)
111
5: PAGE/LINE
6: UNASSIGNED 4 (undefined)
7: UNASSIGNED 5 (undefined)
OFF This selects whether to control the phase correction of the
LTC generated by the TCG.
ON
0: Phase correction control is not performed.
1: Phase correction control is performed.
OFF
This selects whether the CF flag of the TCG is to ON.
ON 0: CF flag is OFF.
1: CF flag is ON.
DF
This selects the DF/NDF mode for CTL and TCG.
0: Drop frame mode.
NDF
1: Non-drop frame mode.
.
<Notes>
No. 509 is valid when the CONTROL is LOCAL or LOCAL
.
ENA of item 004 to " ENA" .
This setup menu is not displayed in the 625 mode.
This is used to switch the phase of the time code, which is
TC IN output from the TIME CODE OUT connector, for the external
LTC input when the TC INT/EXT switch is at the EXT position.
(In EE mode only)
0: Time code is synchronized with output video signal.
1: Time code is synchronized with external time code input.
Description