Download Print this page

Maintenance - aidapt VB502 Assembly And Operating Instructions Manual

Bewl shower commode chair

Advertisement

Available languages

Available languages

COMMODE BUCKET
To remove the commode bucket, simply slide the bucket out from the chrome runners at the
rear of the commode. Cover the top of the bucket to avoid splashing, carefully dispose of the
contents into a proper sluice or WC. Never use an open drain, sink or basin. This could cause
a serious health risk. To avoid the possibility of trapping, do not slide the commode pan on
or off the rails while somebody is sitting on the chair.
Clean out the residue with a suitable disinfectant and refit to the commode after use
NB. Always remove the commode bucket prior to removing the grey horseshoe seat.
CLEANING
Simply hose down/ wash down or pressure wash with a mild detergent solution, ensuring
that all detergents are washed off thoroughly. Wipe the commode thoroughly dry, paying
particular attention to all joints and abutments.
It is recommended that all joints abutments and castors are then sprayed with a water
dispersing agent such as WD40; this will give your Bewl Shower Chair greater longevity and
avoid premature rusting.
APERTURE COVER
When transferring to and from the Bewl Shower Chair, be careful not to apply weight to the
grey removable toileting aperture cover. This may cause the padded aperture cover to push
through.
NB. The padded aperture cover is not designed to be load bearing.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all components
for their safety, also check all upholstery for security, splits, etc. If in any doubt, please do not
issue or use, but immediately contact your supplier for service support.
When reissuing, a risk assessment may be required as to the suitability of the chair for a
particular user.

MAINTENANCE

Please make a safety check of the product at regular intervals or if you have any concerns,
paying particular attention to the castors.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Telephone: +44 (0) 1744 745 020 | Fax: +44 (0) 1744 745 001 | Web: www.aidapt.co.uk
Email: accounts@aidapt.co.uk | adaptations@aidapt.co.uk | sales@aidapt.co.uk
Assembly and Operating Instructions
Ver. 5 07/2012 (1261)
4

Advertisement

loading