Routine Checks And Maintenance - aidapt VA165SILVER Assembly And Operating Instructions Manual

Lightweight self propelled aluminium wheelchair
Hide thumbs Also See for VA165SILVER:
Table of Contents

Advertisement

7. Wheel lock assembly
These are used to hold the wheelchair in a stationary position, and are fitted on either side
of the wheelchair. They should not be used when the wheelchair is moving or to slow it
down. They should always be applied together.
To operate, push the brake lever forward towards the front of the wheelchair. This will
immobilize the wheelchair. To release the brake, move the lever towards the rear of the
wheelchair.
8. Cross Bar
Operation of the cross brace permits the wheelchair to be opened and closed easily. It
should be inspected at regular intervals for signs of wear and bending.
9. Folding Backrest Device
Push down the hinge to fold down the backrest. Automatically lock when pull up the
backrest handle. This device is to enhance the storage feature.
10. Quick Release Wheels
To aid transportation, the rear wheels can be removed by pushing the middle section of the
wheel and pulling to release. To refit, reverse the procedure. Always make sure the wheels
are fully connected before use.
11. Tyre pressure and inflation
For Wheelchairs that are fitted with pneumatic tyres they should be inflated with a manual
operated pump. Under no circumstances should a powered or compressed air pump
be used. The tyre pressure should be tailored for optimum user comfort and ease of
Wheelchair use. We recommend a tyre pressure of 35psi (241KpA) for comfort. However, do
not exceed the maximum tyre pressure stated on the side wall of the tyre. This may differ
slightly between tyres, but is typically:
• 65 psi (487 KpA) for 24" self-propel wheels
• 40 psi (275 KpA) for 12½" transit wheels

ROUTINE CHECKS AND MAINTENANCE

1. Upholstery
Upholstery should be routinely cleaned with a mild soap and water solution. Never use
paint remover or thinners on upholstery.
2. Metal Parts
Clean all metal parts with a wax compound such as car wash to maintain finish. Do not use
any obtrusive cleanser that will scratch the finish on the chair.
3. Cross Brace
Periodically lubricate the centre bolt on the cross brace with light machine oil.
August 2023

Advertisement

Table of Contents
loading

This manual is also suitable for:

Va165orangeVa165redVa165blue

Table of Contents