Sound Bar - Yamaha YAS-105 Owner's Manual

Playing back audio from a

sound bar

1
With the sound bar turned on, press the BLUETOOTH key on the
sound bar's remote control to select Bluetooth as the input source.
The BLUETOOTH indicator on the top panel flashes.
Flashes
2
Turn on the Bluetooth function of the device and then connect.
When connection is made correctly, the BLUETOOTH indicator of the
sound bar lights up.
Lights up
3
Play back a song on the device.
NOTE
• Perform connection with the device and sound bar within 10 meters (33 ft) of each other.
• It may be necessary to select "YAS-105 Yamaha" in the
connection problem occurs. You may have to change the output setting to output audio to the sound bar,
depending on the device you are using.
• Adjust the volume level of the device as required.
• If a device is already connected to the sound bar, terminate that
connect with the new device.
Terminating connection
connection is terminated in the following cases. When the
is terminated with the sound bar turned on, the BLUETOOTH indicator changes from the lit
status to the flashing status and the sound bar enters the connection wait status.
• The Bluetooth function is turned off on the compatible device.
• The BLUETOOTH key on the sound bar's remote control is pressed for more
than 3 seconds.
• The sound bar is turned off.
device on the Using the
The
linked with the operation of the
1
Using the HOME THEATER CONTROLLER application
device list again, in the event that a
By installing the dedicated free application "HOME THEATER CONTROLLER" to a
connection, then conveniently with the
sound adjustments)
NOTE
• To use the application, connect the sound bar and a
connection
• If you enable the
For details on "HOME THEATER CONTROLLER", see the product information on our
website.
standby mode
standby mode allows you to turn on (or off) the sound bar automatically,
With the sound bar turned on, hold down the BLUETOOTH STANDBY
key on the sound bar's remote control for more than 3 seconds.
Holding down the BLUETOOTH STANDBY key for 3 seconds each time toggles the
mode between enabled and disabled.
BLUETOOTH
STANDBY
When the standby mode is enabled and the sound bar is turned off, the
D indicator lights up in red (Bluetooth standby).
Lights up (red)
Functions available on Bluetooth devices with Bluetooth standby mode enabled
Power on interlock function (when the sound bar is turned off)
When connection is made on the device, the sound bar will turn on and will be ready to play
back sound from the device.
Power off interlock function (when the sound bar is turned on)
The sound bar will be turned off when
when BLUETOOTH is selected as the input source.)
device, such as a smartphone, you can perform various operations easily and
device. (Setting items: basic operation, surround mode,
standby mode of the sound bar, you can turn on the power of the sound bar
with the device.
device.
Flash 3 times (enabled), flash once (disabled)
connection is terminated on a device. (Only
device via connection.
11