Advertisement
Random play
Press the RANDOM switch to begin random play. The player will auto-
matically select and play tracks on the disc at random.
"RANDOM"
appears on the display.
If the RANDOM switch is pressed during random play, the player will
select the next random track.
Random introscan play
Press the RANDOM switch, then the INTRO switch, to play the first 10
seconds of each track at random.
Repeat play
Press the REPEAT switch during play, The player will play all the tracks,
all the programmed
tracks or all the random
play tracks repeatedly.
"REPEAT" appears on the display.
To cancel repeat play, press the REPEAT switch
again.
"REPEAT"
disappears.
PROGRAMMED
PLAY
Up to 24 selections on a disc can be programmed
for play in any order.
To begin the programming
procedure,
select "CD" function first.
The tracks are programmed
in the stop mode.
The same track can be programmed
more than once.
~xample:
To program me tracks 5,2, 6 and 10
1. Press the CD MEMORY switch
#R'#G.
TRACK 1
f%.
I
2. Select track 5 by pressing the W / ~
SKIP/SEARCH switch 4 times.
$%G.
TRACK
5
Pr. 1
LISTENING TO TAPES
,.
2.
3.
4.
5,
3.
4.
5.
6,
7,
Press the CD MEMORY switch. "PROG."
remains lit.
Select track2 by pressingthe~
/~
SKIP/SEARCH switch 3times.
>I%G.
TRACK
2
Pr.2
Press the CD MEMORY switch. "PROG."
remains lit.
The remaining tracks are programmed
in the same way.
Press the PLAY/PAUSE switch to start play.
PROG.
TRACK
5
0.01
D
When all programmed
selections
have played,
the player stops
automatically.
The total programmed
time appears.
The programme
contents are retained in memory.
Any attempt to programme
more than 24 selections
will result in
"FULL" being displayed
and discontinuation
of the programming.
The rxoaramme
is cleared in the following
cases:
Deck A is for playback only; deck B is for both playback and recording.
Do not turn the unit off while the tape is running.
Otherwise, the pinch
roller may be damaged.
.-
When the STOP switch is pressed in tie stop mode
When the EDIT switch is pressed in the stop mode
When the OPEN/CLOSE
switch is pressed
Checking the programme
Each time the CD MEMORY switch is pressed
in the stop mode, the
programmed
details sequentially
appear on the display.
Changing a programme
To add a new selection to a programme:
1, In the stop mode, press the CD MEMORY switch repeatedly
until
,, ----
.. . " is displayed.
2. Select a track number as explained
above,
To change a selection:
1. In the stop mode, press the CD MEMORY switch repeatedly
until the
selection to be replaced is displayed.
2. Select a track number as explained
above.
Note:
Programmed
details cannot be partially deleted or inserted.
Set the FUNCTION switch to TAPE. "TA" appears on the display
Press the STOP/EJECT
button to open the cassette holder.
Load the cassette(s).
(2A
Q
o
r
I
DECKB
I
t
DECKA I
After the cassette has been loaded, push the cassette holder back into
position.
Press the PLAY button (deck A or deck B) to begin playback.
Press the STOP/EJECT
button to stop playback at any time. Press it
again to remove the cassette.
When the end of the tape has been reached, automatic
stop will be
activated.
Pause
Press the PAUSE button to temporarily
stop playback or recording. Press
it again to resume operation.
Fast forward and rewind
Press the FFWD or REW button.
When the tape has been wound to the end, the deck stops automatically.
Note:
While playing or recording,
do not press the FFWD or REW button of the
other deck, or the sound quality may deteriorate.
Continuous
playback (From deck A to deck B)
1.
Press the PIAY button of deck A. Deck A playback will begin.
2. Press the PAUSE button of deck B.
3. Press the PLAY button of deck B. Deck B enters the pause mode.
When the tape automatically
stops on deck A, deck B playback will
begin.
When the end of the tape has been reached on deck B, automatic stop
will be activated.
-6-
Advertisement
