Advertisement
7.
Load a C-46 cassette into deck B to record side A.
8.
Press the REC button.
9.
Press the PLAY/PAUSE switch.
-
The total play time for side A is displayed.
-
The total play time for side B is displayed.
Recording starts automatically
from the first programmed
track.
a
PROG.
TRACK
5
0.01
EDIT
SIDE A
b
10.
Follow steps 5-6
of "Time edit recording".
Backward skip edit recording
This type of recording
is the easiest to perform and the tape length setting is not required.
Example:
The track 4 will be interrupted.
SIDE A
i
1
II
2
II
3][4
H
H
)
Manual reverse
8~]711
6
5
4
7
Record from the beginning
of a track.
SIDE B
The track 8 will be interrupted.
1,
2.
3,
4.
Press the EDIT switch until "C -- -" appears.
5. Follow steps 5-6
of "Time edit recording".
Load a cassette.
Press the REC button.
When the tape stops automatically
at the end of side B, CD play also
Press the PIAY/PAUSE
switch. Recording
starts on side A.
stops,
MANUAL RECORDING
1, Set the FUNCTION switch to CD.
3, Press the REC button. (Deck B enters the record pause mode.)
2. Load a disc and cassette.
4, Press the PIAY/PAUSE
switch. Recording
starts.
For programmed
recording,
programme
the material in advance
(as described
under "PROGRAMMED
PL4Y").
TAPE DUBBING (DECK A to DECK B)
1. Load the playback cassette into deck A and a blank cassette into deck
B.
2. Set the FUNCTION switch to TAPE.
3. Set the cassette in deck A to the point where recording will begin.
4. Select the dubbing
speed with the DUBBING/BEAT
CANCEL switch.
NOR:
For dubbing
while monitoring
at normal speed.
HIGH:
For dubbing
the tape at high speed (twice normal speed).
5. Press the PAUSE button of deck B.
6. Press the REC button of deck B.
7. Press the PLAY button of deck A to start dubbing.
8. To stop dubbing,
press both STOP/EJECT
buttons.
Automatic stop during dubbing
When deck A tape is longer than deck B tape:
When deck B stops automatically,
deck A continues
playback mor-
at normal speed.
When deck B tape is longer than deck A tape:
When deck A stops automatically,
deck B erases the tape to the end.
Do not change the dubbing
speed during the dubbing
operation.
-9-
Advertisement
