Advertisement
MAINTENANCE
Cleaning the decks A and B heads
To ensure playback and recording with good-quality
sound, use cotton
swab to clean the heads, pinch rollers and capstans of the decks after
about every 10 hours of use.
If the dirt persists, soak the swab in a little methylated
spirit or head
cleaning fluid and then clean.
,llJ
,Jd
Main unit
I
5
Use a soft cloth to remove dirt on the main unit.
If the dirt persists, dip a soft cloth into a diluted
solution
of neutral
detergent, wring it out, wipe away the diit, and then take up any moisture
1.
2,6.
with a dry cloth.
Do not use benzine, thinners or alcohol since they will marthefinishofthe
3,7.
5.
surfaces.
4, 8.
Tuner section
Reception frequency:
FM: 87.5-108
MHz
AM: 522-1710
kHz
CD player section
Channels:
2-channel stereo
Sampling frequency:
44.1 kHz
Pick-up:
Optical 3-beam semiconductor
laser
Frequency response:
20
I-iz
to 20 kHz
Wow/f Iutter:
Below measurable
limits
Cassette deck section
Track system:
4-track, 2-channel stereo
'-equency response:
80
tiz
to 13.5 kHz
Signal-to-noise
ratio:
50 dB
Wow/flutter:
0.15% (WRMS)
Fast forward/rewind
time:
Approx. 110 sec. (C-60)
Amplifier section
Output power:
5 W x 2 (at 4 ohms, 10'%.distortion)
Graphic equalizer:
*1O dB (300 Hz, 1kHz, 10kHz)
Inputs
PHONO: 2.5 mV/50k ohms
outputs
SPEAKERS: 4 ohms
PHONES: 8-32
ohms
SPECIFICATIONS
I
L,
1
L--7
4
8
Cotton swab
Capstan
Pinch roller
Erase head in DECK B
Record/Play
head (Play head in DECK A)
Power requirements:
AC 230-240
V, 50
tiz
Power consumption:
50 w
Dimensions:
270(W) x 285(H) x 186(D) mm
Weight
3.8 kg
Speaker systems
Type:
2 way bass reflex
Unit used:
Woofer: 12 cm cone type
Tweeter: piezoelectric
Maximum power-handling
capacity:
10 W (peak)
Nominal impedance:
4 ohms
Dimensions:
180(W) x 285(H) x 191 (D) mm
Weight:
1.4 kg (per speaker)
Specifications
subject to change without notice,
-10-
Advertisement
