Advertisement
For AW-CB400L
Specifications
Supply voltage:
Power consumption: 3.8 W
indicates safety information.
Input connectors
DC 12V IN:
GND:
Output connectors
CONTROL OUT
TO CONTROL PANEL:
CONTROL OUT
TO CAMERA 1 to 5:
Input/output connectors
INCOM (top panel):
TALLY/INCOM:
Switch functions:
Adjustment functions:
Ambient operating temperature:
Storage temperature:
Ambient operating humidity:
Dimensions (W x H x D):
Weight:
Finish:
Weight and Dimensions indicated above are approximate.
Specifications are subject to change without notice.
Accessories
Pan/tilt control panel (AW-RP400) connecting cable ...... 1
Tally/INCOM connector (D-SUB 15-pin) ......................... 1
Rack-mounting adaptors ................................................. 2
Join-up fixture .................................................................. 1
Mounting screws (M4 x 8 mm) ........................................ 8
Join-up screws (stepped screws) .................................... 2
Joining sticker .................................................................. 2
-
DC 12.0 V
XLR, 4 pins
GND terminal
D-SUB 29-pin
RJ45, camera control RS-422 level
10Base-T straight cable (UTP category 5), max. 1000 meters
XLR, 4 pins
D-SUB 15-pin
TALLY: Contact input (do not apply a voltage in excess of 5V)
INCOM: 4-wire system
DATA SET, menu, camera control selection, DTL, scene file selection, gain selection,
BAR/CAM switching, white balance selection, AWC, ABC, call, lens iris
AUTO/MANU/LOCK switching, option switches (1 to 4)
LCD contrast, INCOM level, lens iris, menu settings, R-GAIN, B-GAIN, pedestal, R-PED,
B-PED
- 10˚C to +45˚C
- 20˚C to +60˚C
30% to 90% (no condensation)
100 x 85 x 266 mm
1.4 kg
Colour resembling Munsell 3.5 paint
- 3 -
Advertisement
