Connecting Output Terminals; Connecting To The Control Panel - Pioneer DJM-900NXS2 Operating Instructions Manual

Connecting output terminals

External effector
1 Also connect the external effector to the [RETURN] terminal (input terminal).
2 Be sure to use the [MASTER1] terminals only for a balanced output. Connection with an unbalanced input (such as RCA) using an XLR to RCA
converter cable (or converter adapter), etc., may lower the sound quality and/or result in noise.
For connection with an unbalanced input (such as RCA), use the [MASTER2] terminals.
3 Be careful not to accidentally insert the power cord of another unit to [MASTER1] terminal.

Connecting to the control panel

USB
USB port covers
1
A
MIDI
ON/OFF
PHONES
1 Do not push or pull hard on a USB port cover. It could be damaged.
3
L R
Power amplifier Power amplifier
2
1
Computer
Connect using USB cables.
USB hubs cannot be used.
DIGITAL LINE DIGITAL LINE
A B PHONO A B
RETURN
AUX
TRIM TRIM
DECK 3/C DECK 1/A
CLIP CLIP
B
0
CROSS FADER ASSIGN
A
Headphones
L R
Analog input Power amplifier
2
recording device (for booth monitor)
DIGITAL LINE DIGITAL LINE
PHONO A B PHONO A B PHONO
RETURN RETURN RETURN
AUX AUX AUX
TRIM TRIM
DECK 2/B DECK 4/D
CLIP CLIP
B
Digital audio
input device
Mobile device
SEND / RETURN
MASTER
LEVEL
0
ON / OFF
LEVEL
CLIP
MIN MAX
ON / OFF
USB port covers
1
11
En