To secure loads, use the cargo tie-down
loops located inside the cargo bed area.
See Section 2 of your Owner Manual.
Two-Tier Loading and Optional
You can create an upper load platform
by positioning four 2x6 wooden planks
across the width of the pickup box.
Insert the planks into the pickup box
depressions (shown below), allowing
for at least a 3/4-inch (2-cm) bearing
surface on each side of the plank.
Cargo bed depressions for two-tier loading
Ensure that the upper-tier load is
securely tied down, with its center of
gravity in a zone over the rear axle.
Note: An accessory bed extender,
available from your dealer, provides
even more flexibility for longer loads.
See Section 4 of your Owner Manual.