Table of Contents
Advertisement
Getting to Know Your Canyon
10
Automatic Headlamp System
During daytime driving, your vehicle's
Automatic Headlamp System may tem-
porarily switch the headlamps and interi-
or light system, including the radio dis-
play, to the nighttime mode. This occurs
when encountering darker conditions,
such as under a bridge or overpass, or
inside a parking garage.
When you start the vehicle at night, the
automatic headlamps will come on
immediately. The system uses a light
sensor located on top of the instrument
panel. To ensure proper headlamp sys-
tem operation, avoid placing objects or
stickers on or near the sensor.
See Section 3 of your Owner Manual.
Fog Lamps (if equipped)
The fog lamp
button is located
near the exterior
lamps control.
Turn on the fog
lamps
• Press the button
once while the headlamps or parking
lamps are on.
The button's indicator light will glow
when the fog lamps are on.
Turn off the fog lamps
• Press the button again.
The fog lamps will shut off whenever the
high beam headlamps are turned on,
and will reactivate when the high beam
headlamps are dimmed or turned off.
The fog lamps are cancelled each time
the ignition is turned off, and, when
needed, must be turned on manually
after restarting the vehicle.
See Section 3 of your Owner Manual.
Cargo Lamps
The cargo lamps provide illumination of
the cargo area and the interiors of the
top-box storage units. The controls are
located near the exterior lamps control.
Turn on the cargo lamps
• Press the button once.
The button's indicator light will glow
when the lamps are on.
Note: To turn your cargo lamps on, the
dome lamp override must not be activat-
ed, and the dome lamps must be on.
See Section 3 of your Owner Manual.
Advertisement
Table of Contents
