To make a call
To erase a stored number (from extension 10 only)
AUTO
1 .
Press any available line key
* Listen for the outside dial tone. The line indicator will
light up green.
2.
Press AUTO key
Dial the address number (2 digits) from 00 to 89
*
The telephone number stored in the address will- be
dialed.
Lift handset and speak when answered
Press ON/OFF- key
* Listen for the intercom dial tone from speaker.
The ON/OFF indicator will light up.
Press AUTO key
2.
3. Press address number (00 to 89) you wish to erase
4. Press HOLD key
Press ON/OFF key
* The ON/OFF indicator goes off.
1 1