ViewSonic LS810 User Manual page 50

FUNCTION
Advanced
Reset color settings
Auto Power On
Smart Energy
MHL Settings
Color
See "Adjusting Color"
Tint
See "Adjusting Tint" for details.
Sharpness
See "Adjusting Sharpness"
Gamma
See "Selecting a gamma setting"
Brilliant Color
See "Adjusting Brilliant Color"
Noise Reduction
See "Reducing image noise"
Color Management
See "Color Management"
Returns all color settings to the factory preset values.
Computer
Selecting Enable allows the projector to turn on
automatically once the VGA signal is fed through the
VGA cable.
CEC
See "Using the CEC function"
Direct power on
Selecting On allows the projector to turn on
automatically once the power is fed through the power
cord.
Auto Power Off
See "Setting Auto Power Off"
Sleep Timer
See "Setting Sleep Timer"
Power Saving
See "Setting Power Saving"
Please check your MHL dongle and Power Output of
OSD settings before used.
If you'd like to have power charging through additional
USB-type A, make sure to switch the Power Output
from MHL to USB-type A.
MHL Reset
Selecting Reset to reapply power after a power outage.
43
Description
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.