About Your Automatic Spinemaster; How The Spinemaster Works; Adjustments And Settings - Watkiss spinemaster Operating Manual

HOW THE
SPINEMASTER
WORKS
!
Outfeed
"
SquareBack Booklets
#
Stacker Support
$
Stacker Release Lever
%
Book Thickness Adjust-
ment
&
Stacker Full Sensor
'
Operating Mode Adjust-
ment
(
Sidelay
)
Infeed (Hand Feed)
ADJUSTMENTS AND
SETTINGS
Fig 2. Book Thickness
Adjustment
Watkiss Automatic SpineMaster Operator Guide - Issue 1a - April 2004
2 About your Automatic
SpineMaster
The booklet is transported, spine first, into the ASM. The
SquareBack spine is formed and the booklet is then
delivered to the stacker on the top of the ASM.
"
!
Fig 1. The Automatic SpineMaster
Mains ON/OFF
The Mains ON/OFF switch is on the front of the machine.
1 = ON, 0 = OFF.
Mains Input
The Mains Input is on the back of the machine. Alongside
the Mains Input is a label indicating the machine voltage
requirements.
Book Thickness Adjustment
Max.
The Book Thickness Adjustment (see Fig 2.) can be used
to obtain optimum results with different booklet thickness-
es. Turn the knob clockwise to increase the effect, and
anti-clockwise to decrease the effect. The type of material
will also influence the required setting.
Min.
$
#
%
'
&
(
)
3