Small Booklets Do Not Stack Well - Watkiss spinemaster Operating Manual

Post-processes stitched or stapled booklets
Hide thumbs Also See for spinemaster:
Table of Contents

Advertisement

Lid (open)
Lid Support Strut
Caution
Warning
SMALL BOOKLETS
DO NOT STACK WELL
10
Watkiss Automatic SpineMaster Operator Guide - Issue 1a - April 2004
• Open the top lid by lifting it upwards.
Fig 6. The ASM with front cover and lid opened
• Retrieve the booklet from inside the machine. Take
care not to dislodge any of the conveyor belts.
If the booklet cannot be removed because it is jammed
in the clamp mechanism, do not attempt to force the
mechanism open. Contact your Watkiss service depart-
ment.
• Close the ASM lid by lifting it slightly, push the sup-
port strut and then lower the lid.
• Lift up the front cover and push it closed, ensuring
that the latches re-engage.
When releasing the ASM lid support strut, hold the lid
securely and take care not to drop it on your hand.
If small booklets do not stack tidily, the booklet control
springs should be used.
Open the front cover of the ASM, as explained above,
and release the two springs by pulling them out from
Front Cover
(open)

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Watkiss spinemaster

Table of Contents