Gemini 7024 is a modular alarm without ultrasonic sensor. the alarm; the LED switches on. If the LED does not switch on increase the sensitivity (fully The systems Gemini 7024US a nd Gemini 7024 can be installed on vehicles (with clockwise) and repeat test.
Battery negative ê 3. Turn the ignition key to OFF position. BLACK initialled Gemini alarm PINK wire ê BLACK initialled In this condition the engine of the vehicle can be switched on for 20 times without triggering Gemini alarm BLUE wire ê...
HIGH POWER, ELECTRONIC SIREN GEMINI 7147 DESCRIPTION. GEMINI 7147 is 2 wires, high power electronic siren designed to be installed quickly and simply in the engine compartment. WIRING CONNECTIONS (for the installer) Disconnect the negative terminal of the battery and only re-connect after the installation is complete.
Page 6
ORIGINAL RECEIVER ORIGINAL RECEIVER 7024US 7024US CODE CENTRAL DOOR LOCKING YELLOW- BLUE (ON) BROWN-RED ORIGINAL UNIT PINK GREEN-BLUE (OFF) WHITE-L. BLUE YELLOW-BLUE (ON) Open Close + / - GREEN-BLUE (OFF) CENTRAL DOOR LOCKING ORIGINAL UNIT Earth Diagram for POSITIVE controls Diagram for codified receiver, switch for single control Negative to rest.
Page 7
YELLOW-BLUE (ON) Lock doors switch GREEN-BLUE (OFF) BLACK initialled MB Battery Earth 12VOLT Diagram for codified receiver with single control switch free to rest. Connection 7024 unit with self-powered 7125TNC siren. 7025 ORIGINAL Fascetta 7024US RECEIVER 7024US NOTE: The Black wires have the identification mark on the end.
Page 8
SIREN POSITIONING 7024US 2344 2344 RED-BLACK White-Red White-Brown PINK Connection of the 2344 module with the 7024 alarm system. MOUNTING OF THE SOCKET OF THE ELECTRONIC KEY 50 mm 7024US 2343 RED-BLACK White-Red White-Brown PINK Connection of the 2343 module with the 7024 alarm system.