Table of Contents
Advertisement
Figure 36:
Follow these steps to connect antennas:
Remove the protective dust caps from the antenna connectors.
1.
Mount the external antenna on the same supporting structure as you did the OAP433e,
2.
within 3 m (10 ft.) of it, using the bracket supplied in the antenna package.
Connect the antenna to the OAP433e's N-type connector (5G-1 and 2.4G-1) using the RF
3.
coaxial cable provided in the antenna box.
Apply weatherproofing tape to the antenna connectors to help prevent water entering the
4.
connectors.
Follow these steps to attach the ground wire:
A grounding screw and cable are both provided in the product packaging. The OAP433e
1.
has two grounding holes, in the corners on the underside of the AP. See
page
Connect the screw to either of the holes and attach the provided grounding wire.
2.
Attach the other end of the grounding wire to an appropriate grounding source.
3.
60
Antenna-Radio Mapping & Radio Setting
61.
Figure 37 on
Installing the Access Point
Advertisement
Table of Contents
