Samsung galaxy note 3 User Manual page 122

To activate Air Command:
With the Air command feature active, the Air Command button
toolbar appears once you remove the S Pen from its slot. This
toolbar allows you to quickly activate frequently used
applications or actions.
1. From the Home screen, tap
CONTROLS.
2. In a single motion touch and slide the Air command
slider to the right to turn it on
To activate Motion:
1. From the Home screen, tap
CONTROLS.
2. In a single motion touch and slide the Motions slider to
the right to turn it on
3. Read the on-screen notification and tap OK.
Note: At least one feature must be activated before Motion can
be activated.
112
Settings 
.
Settings 
.
4. The following motions are available:
• Direct call: Once enabled, the device will dial the currently
displayed on-screen Contact entry as soon as you place the
device to your ear.
• Smart alert: Once enabled, pickup the device to be alerted
and notified of you have missed any calls or messages.
• Zoom: Once enabled, you must be on a screen where
content can be zoomed. In a single motion, touch and hold
two points on the display then tilt the device back and forth to
zoom in or out.
• Browse an image: Once enabled, touch and hold a desired
on-screen image to pan around it. Move the device left or
right to pan vertically or up and down to pan horizontally
around the large on-screen image.
• Mute/pause: Once enabled, mute incoming calls and any
playing sounds by turning the device display down on a
surface. This is the opposite of the Pickup to be Notified
Gesture.