Voice Control - Samsung galaxy note 3 User Manual

2. Tap Voice input and select a voice input service:
• Enhanced Google services: Full hotword and interaction
capabilities.
• Basic Google recognition: Simple speech to text.
3. Tap Text-to-speech options and select Samsung text-to-
speech engine.
4. Tap next to the preferred TTS engine configure the
following settings:
• Language: allows you to set the language for spoken text.
• Settings for text-to-speech engine allows you to change the
voice setting.
• Install voice data: allows you to install voice data for speech
synthesis.
5. Scroll down to the General section to access the
following options:
• Speech rate: Set the speed at which the text is spoken.
• Listen to an example: Play a sample of speech synthesis
(available if voice data is installed).
• Default language status: Displays whether or not the default
language is supported.
106
Pointer speed
This option sets your Pointer speed for your mouse or
trackpad when you are using a keyboard dock accessory.
1. From the Home screen, tap
CONTROLS Language and input.
2. Tap Pointer speed then drag the slider to the right to go
faster or to the left to go slower.
3. Tap OK to save your setting.

Voice control

The Voice control settings allow you to set up voice
commands to control your device.
1. From the Home screen, tap
CONTROLS Voice control.
2. Tap the ON/OFF icon
activate Voice control.
3. The following options are available. Tap an option to
create a checkmark and activate the feature.
• Incoming calls: allows you to answer or reject calls using the
commands Answer and Reject.
• Alarm: allows you to stop or snooze an alarm by using the
commands Stop and Snooze.
Settings 
Settings 
at the top of your screen to