Yamaha xvs650 Supplementary Service Manual page 18

P Fasten the sidestand switch lead with a metal
clamp.
Q Connect the rear brake switch coupler in front of the
roll over valve stay.
R Install the plastic locking tie immediately below the
cable guide bracket.
S Pass the speedometer
speedometer cable holder.
T To the rectifier / regulator.
U Pass the rear brake switch lead between the frame
and rectifier / regulator. Do not pinch the rear brake
switch lead.
cable through the
–10–
CABLE ROUTING
V Fasten the rear brake switch lead with a plastic
locking tie.
W To the speedometer light leads.
X Place the rectifier / regulator coupler completely
inside the motorcycle body.
Y Pass the fuel tank breather hose and vacuum
chamber air vent hose through the holder.
Z Pass the speedometer cable through the holder.
AA Place the couplers behind the steeirng head.
SPEC