Panasonic KX-T7565 User Manual page 23

Used to enter and exit the Station/User
Programming mode.
PROGRAM
PF (Programmable Feature): Located
on the upper part of the CO button
array or on the DSS Console. Assigns
(PF)
the desired button and used to access
the stored function. Mostly used as a
One-Touch dialling button. (Only the "F
and number" may be shown on some
telephones.)
Used to redial.
REDIAL
Used to disconnect the line.
RELEASE
Used to store a dialled phone number
and redial.
(Save)
Secondary Directory Number: A copy
of the other extension's PDN button.
Acts as a proxy of the owner PDN
(SDN)
button.
Used to select the displayed function
or to call the displayed phone number.
SELECT
(KX-T7531 only)
Used to alternate between the
subfunctions on the display.
SHIFT
User Manual
Primary Directory Number: Used to
make or receive an intercom / outside
(PDN) call. This button can also be used to set
/ cancel various features available for
the extension.
Soft: Used to perform a function or
operation appearing on the bottom line
of the display.
Speakerphone: Used for the hands-
free operation.
SP-PHONE
Used to transfer a call to another party.
TRANSFER
Used to monitor an intercom call
automatically, but it cannot be used for
VOICE CALL/
MUTE
hands-free conversations. It also
mutes the handset microphone during
a conversation.
(KX-T7550, KX-T7560 only)
Used to adjust the volume of the
telephone speaker, handset receiver,
VOLUME
headset or ringer. This button can also
be used to adjust the display contrast.
If the term is in parentheses like (Account) in this
section, it means a flexible button has been made
into an "Account" button.
Operation
23