Eddie Bauer SureFit User Manual page 22

6. Tuck Loose End of Belt
You MUST tuck loose end
of the LATCH belt back
through the belt path
hole.
7.
Check Belt Tightness
Grasp the base at the
belt path with one hand.
Push and pull the child
restraint from side to
side, forward and back.
The child restraint should
not move more than 1 in.
(2.5 cm).
NOTE: If it moves more
than 1 in. (2.5 cm), try
reinstalling the child
restraint or try another
seating location.
8. Attach Carrier to Base
Secure child in child
restraint.
Align the notches in the
front of carrier with the
base lock bar.
Push down firmly to lock.
You will hear a "click"
when it is locked. Pull up
on carrier to make sure it
is locked.
41 xx
Failure to securely attach carrier to base
can result in serious injury or death.
9.
Check Angle
Indicator
(1.8-4.9 kg)
4-11 lb
Check the angle
indicator while parked
11-35 lb
on level ground. The ball
(4.9-15.9 kg)
should be in the zone
that matches the weight
of your child.
Repeat steps 3-8 if
not reclined correctly
and adjust base if
needed (see section
C-8).
You may need to place
a large rolled towel or
foam pool noodles under
the front of the base to
achieve correct recline
angle.
Check often to be sure
padding is still in place
and the belt is tight.
42
continued on next page.