Eddie Bauer SureFit User Manual page 10

4.
Unbuckle Harness
Press red button.
Pull buckle tongues out.
Place harness straps out
of the way.
5.
Place Child in Child
Restraint
Place the child's bottom
and back flat against the
restraint.
This will allow the harness
straps to be properly
tightened.
6. Check Buckle
Position
Determine which of the
available buckle positions
will provide a snug fit for
your child.
7.
To Change Buckle
Position
Remove child.
From under the seat,
rotate the metal retainer
then insert retainer up
through the carrier and
pad.
17
a.
For small infants, skip to
step c.
Insert the buckle's metal
retainer through the
desired slot.
Make sure that the buckle
is facing out.
b.
Pull up on buckle strap to
make sure it is secured.
The buckle must not
pull out.
Failure to reinstall the harness system
correctly can result in serious injury or
death.
c.
Buckle Placement for
Small Infants
Choose the slot closest to
the back of the restraint.
Push metal retainer
through the pad and
carrier.
Make sure that the buckle
is facing out.
18
continued on next page.