Securing Child In Child Restraint - Eddie Bauer SureFit User Manual

11.
12.
straps or harness adjustment strap and make sure
the harness straps are COMPLETELY ON the splitter
plate.
Do not use this child restraint rear-
facing if the top of your child's head
is within 1 in. (2.5 cm) from the top
of the child restraint.
Make sure the harness height is correct for
your child's size.
Make sure you have reinstalled the harness
system correctly.
Failure to follow these steps can result in
serious injury or death.
21
Rethread harness into new
harness slot location.
Make sure harness straps
do not twist.
Attach Harness Straps
to Splitter Plate
From the back of the
child restraint, fit the
harness strap loops onto
the splitter plate.
The sewn end of the
harness strap loops
MUST face towards you.
DO NOT twist harness
C-6 Securing Child in Child Restraint
DO NOT put snowsuits or
bulky garments on your
infant when placing them
in the child restraint.
Bulky clothing can prevent
the harness straps from
being tightened properly.
To keep infant warm,
buckle your infant in the child restraint
and place a blanket around the infant or
place the infant's coat on backwards after
buckling in.
Failure to follow these steps can result in
serious injury or death.
1.
2.
22
Position Harness
Straps Over the
Child's Shoulders
Buckle Harness
Push each buckle tongue
into buckle until you hear
a "click."
Pull up on harness straps
to make sure buckle is
locked.
continued on next page.