Advertisement
Making and answering calls
Answering calls
Making external calls
Making internal calls
Making or answering a
second call
˙
Page 2 Enterprise Edge M7100 Quick Reference Guide
1. When your telephone rings, lift your handset.
You are immediately connected to the call.
Depending upon the dialling mode programmed for your
telephone, you may be able to dial your call before lifting your
handset.
1. Pick up the handset.
‚
2. Dial
(your system's exchange line access code or a line
pool access code).
3. Dial the external telephone number.
1. Pick up the handset.
2. Dial the internal number.
Note: Extension numbers and the exchange line access code
are supplied by your System Administrator.
The M7100 telephone allows you to have two calls active at
the same time.
You can switch between calls using
To answer a second call while on another call
˙
1. Press
The second call automatically comes onto the line.
To hold a call and make a second call
˙
1. Press
2. Dial the telephone number for the second call.
To return to the first call
˙
1. Press
The second call is automatically put on hold.
To hold a call
˙
1. Press
˙
2. Press
Check the display for confirmation or additional information.
Note: If you have difficulty selecting a line on your M7100
telephone, ask your System Administrator to check your
telephone's programming. Your telephone must be assigned to
use an exchange line or line pool.
˙
to put the first call on hold.
to put the first call on hold.
again to return to the first call on hold.
.
again to return to the call on hold.
.
Advertisement
