Lenovo ThinkPad R400 Setup Poster page 62

52
ThinkPad
Downloaded from www.Manualslib.com
8. With the notched end of the SO-DIMM toward the contact edge side of
the socket, insert the SO-DIMM into the socket at an angle of about 20
degrees 1 ; then press it firmly 2 .
Note: If you install a memory module in only one of the two memory
slots, install it in the lower slot.
2
1
2
9. Pivot the SO-DIMM downward until it snaps into place.
10. Make sure that the card is firmly fixed in the slot and does not move
easily.
®
T400 and R400 Service and Troubleshooting Guide
manuals search engine
1