PowerWasher TN-1200 Operator's Manual page 12

•
•
• To clean inner conical water screen, remove quicl( connect and remove the
plastic ~ ~~-­
• preen from the pump Inlet.
• Backflush screen to clean.
I
• Replace screen and quick connect immediately to prevent any foreign matter from
entering the pump.
CAUTION: Do not damage the screen while removing or cleaning.
Any foreign particles entering the pump may damage the pump.
CAUTION
5.5 COOLING SYSTEM
The air vents, located in and around the pressure washer, must be kept clean and free
of any obstructions to ensure proper air cooling of the motor during
opeation.
WARNING: Prevent water from penetrating the vents of the pressure
washer to minimize the risk of damage to the machine and to reduce
the risk of shock to the operator.
CAUTION
I
6.0 SERVICING A DOUBLE-INSULATE APPLIANCE
I
~-----------------------------
6.0 SERVICING A DOUBLE-INSULATE APPLIANCE
In a double-insulated product, two system of insulation are provided instead of
grounding. No grounding means is provided on a double-insulated product, nor should
a means for grounding be added to the pressure washer.
Servicing a double-insulated product requires extreme
care and knowledge of the system, and should be done
only by qualified service personnel.
Replacement parts for a double-insulated product must
be identical to the parts they replace. A double-insulated
product is marked with the words "DOUBLE-
INSULATION" or "DOUBLE- INSULATED".
The following symbol may also be marked on the
product.
D
------------------------------ 12 -----------------------------