Installing The System Board; Replacing The Computer Cover - Dell Inspirion 530 SERIES Owner's Manual

Place the system board assembly that you just removed next to the
replacement system board to compare and ensure they are identical.

Installing the System Board

1 Gently align the board into the chassis and slide it toward the back of the
computer.
2 Using the screws, secure the system board to the chassis.
3 Replace the cables that you removed from the system board.
4 Replace the processor and the heat sink assembly (see "Installing the
Processor" on page 170).
NOTICE:
5 Replace the memory modules into the memory sockets at the same
locations from which you removed them (see "Installing Memory" on
page 126).
6 Replace any add-in cards on the system board.
7 Replace the computer cover (see "Replacing the Computer Cover" on
page 176).
8 Connect your computer and devices to an electrical outlet, and turn them on.
9 Verify that the computer works correctly by running the Dell Diagnostics
(see "Dell Diagnostics" on page 90).

Replacing the Computer Cover

CAUTION:
safety instructions located in the Product Information Guide.
CAUTION:
covers, bezels, filler brackets, front-panel inserts, etc.) removed.
1 Ensure that all cables are connected, and fold cables out of the way.
2 Ensure that no tools or extra parts are left inside the computer.
3 Align the tabs at the bottom of the computer cover with the slots located
along the edge of the computer.
4 Press the computer cover down and slide it towards the front of the computer
until you feel a click or feel the computer cover securely installed.
5 Ensure that the cover is seated correctly.
176
Downloaded from www.Manualslib.com
Ensure that the heat sink assembly is correctly seated and secure.
Before you begin any of the procedures in this section, follow the
Do not operate your equipment with any cover(s) (including computer
Removing and Installing Parts
manuals search engine