Dell Inspirion 530 SERIES Owner's Manual page 135

6 If you are removing the card permanently, install a filler bracket in the
7 Replace the card retention bracket, ensuring that:
8 Fix the card retention bracket by replacing and tightening the screw.
9 Replace the computer cover, reconnect the computer and devices to
10 Remove the card's driver from the operating system.
11 If you removed a sound card:
12 If you removed an add-in network connector:
Downloaded from www.Manualslib.com
empty card-slot opening.
NOTE:
Installing filler brackets over empty card-slot openings is necessary to
maintain FCC certification of the computer. The brackets also keep dust and
dirt out of your computer.
• The guide clamp is aligned with the guide notch.
• The tops of all cards and filler brackets are flush with the alignment bar.
• The notch in the top of the card or filler bracket fits around the
alignment guide.
NOTICE:
To connect a network cable, first plug the cable into the network device
and then plug it into the computer.
electrical outlets, and then turn them on.
Enter system setup (see "System Setup" on page 187), go to Onboard
a
Devices and select Integrated Audio, and then change the setting to On.
Connect external audio devices to the audio connectors on the back
b
panel of the computer. See "Back View of the Computer" on page 19.
Enter system setup (see "System Setup" on page 187), go to Onboard
a
Devices and select Integrated NIC, and then change the setting to On.
Connect the network cable to the integrated connector on the back
b
panel of the computer. See "Back View of the Computer" on page 19
and "Back Panel Connectors" on page 22.
manuals search engine
Removing and Installing Parts
135