Do you have a question about the RZ V3 and is the answer not in the manual?
Questions and answers
steve
March 7, 2025
On my new KAM RZ V3 I have pressed the Mode button for ages, but it never goes to the 4 dots - what do i do now?
2 comments:
Mr. Anderson
March 7, 2025
The manual does not provide specific troubleshooting steps for the Mode button issue where the 4 dots do not display. However, you can try the following general troubleshooting steps:
1. Power Cycle: Turn off the unit and unplug it from the power source. Wait a few minutes, then turn it back on. 2. Check Power Supply: Ensure the unit is properly connected to a working power source. 3. Inspect Mode Button: Press the Mode button firmly and check if there is any response. 4. Reset Connections: If using an internal battery, ensure it is charged or try using an AC power supply. 5. Check for Other Functions: Test if other buttons and media inputs work correctly to identify if the issue is isolated to the Mode button. 6. Factory Reset: If possible, refer to the manual for a reset option. 7. Contact Support: If the issue persists, seek assistance from the retailer or manufacturer.
If none of these steps resolve the issue, servicing by a qualified technician may be required.
This answer is automatically generated
Steve
March 10, 2025
@Mr. Anderson
steve
March 7, 2025
My new Kam RZ V3 speaker came with 2 mics, but nowhere can I see what type of battery goes in them??
1 comments:
Mr. Anderson
May 14, 2025
The type of battery used in the KAM RZ V3 speaker microphones is not specified in the provided information.
This answer is automatically generated
steve
March 7, 2025
My new Kam RZ V3 came with a small hand held control device, but nowhere can I see what to do with it!
1 comments:
Mr. Anderson
May 14, 2025
The handheld control device that comes with the KAM RZ V3 is a wireless microphone transmitter used for audio input.
Page 1
For the latest instruction manual updates and information on the entire Kam range visit: www.kam.co.uk Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com...
Page 2
Thank you for purchasing this Kam product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. Please retain them for future reference. This unit has been tested at the factory before being shipped to you.
Page 3
Please read the rest of this manual before turning on the power or adjusting the volume controls. Connecting via Bluetooth To connect your Bluetooth enabled smartphone or MP3 player, ensure that your device and your RZ V3 Portable PA are both switched ON and that Bluetooth is running on your device.
Page 4
Loop / Cycle button: repeats the currently played track Rewind button: plays previous track Forward button: plays next track Kam RZ12A V3 Portable / RZ15A V3 Portable technical specifications Description Active 2-way, full range active portable PA systems with wireless Bluetooth and VHF connection Power supply / fuse AC 220-240V 50/60Hz / 2.5A...
Need help?
Do you have a question about the RZ V3 and is the answer not in the manual?
Questions and answers
On my new KAM RZ V3 I have pressed the Mode button for ages, but it never goes to the 4 dots - what do i do now?
The manual does not provide specific troubleshooting steps for the Mode button issue where the 4 dots do not display. However, you can try the following general troubleshooting steps:
1. Power Cycle: Turn off the unit and unplug it from the power source. Wait a few minutes, then turn it back on.
2. Check Power Supply: Ensure the unit is properly connected to a working power source.
3. Inspect Mode Button: Press the Mode button firmly and check if there is any response.
4. Reset Connections: If using an internal battery, ensure it is charged or try using an AC power supply.
5. Check for Other Functions: Test if other buttons and media inputs work correctly to identify if the issue is isolated to the Mode button.
6. Factory Reset: If possible, refer to the manual for a reset option.
7. Contact Support: If the issue persists, seek assistance from the retailer or manufacturer.
If none of these steps resolve the issue, servicing by a qualified technician may be required.
This answer is automatically generated
@Mr. Anderson
My new Kam RZ V3 speaker came with 2 mics, but nowhere can I see what type of battery goes in them??
The type of battery used in the KAM RZ V3 speaker microphones is not specified in the provided information.
This answer is automatically generated
My new Kam RZ V3 came with a small hand held control device, but nowhere can I see what to do with it!
The handheld control device that comes with the KAM RZ V3 is a wireless microphone transmitter used for audio input.
This answer is automatically generated