Mounting; Luminaire Spacing - Philips SELECON PLCYC1 MKII Quick Start Manual

PLCYC1 MKII LED Luminaire

4. Mounting

PLCYC1 MKII LED Luminaires offer a plastic monocoque yoke design for mounting by theatrical clamps or hooks
(sold separately).
WARNING! Before attempting any installation or service, disconnect all power at power source. Turning off the
output of the luminaire does not disconnect power. Installation and service should only be performed by a trained and
qualified professional. Be sure to check circuit capacity before installing luminaires.

Luminaire Spacing

For optimum performance and use, PLCYC1 MKII LED Luminaires should be mounted and spaced as shown in
Figure 3.
How to read Figure 3:
• S = Spacing between fixtures
• D = Distance from fixture to projection surface.
• A ratio of S = D x 0.9 is the formula used to calculate the optimum spacing for these fixtures.
S
PLCYC1 MKII LED Luminaires
Figure 3: PLCYC1 MKII LED Luminaire Hanging / Spacing
SAFETY CABLE: FOR LUMINAIRE, a safety cable (included with unit) is recommended
for all hanging installation and may be required by national and local codes. Attach safety
cable to luminaire and to structure.
QuickStart Guide
D
7
Mounting